R0106-HP MSR Router Series Interface Command Reference(V7)

87
channel-set (CE1/PRI interface)
Use channel-set to bundle timeslots on a CE1/PRI interface into a channel set.
Use undo channel-set to cancel the bundling.
Syntax
channel-set set-number timeslot-list list
undo channel-set [ set-number ]
Default
No timeslots are bundled into channel sets.
Views
CE1/PRI interface view
Predefined user roles
network-admin
Parameters
set-number: Specifies the number of the channel set formed by bundling timeslots on an interface, in the
range of 0 to 30.
timeslot-list list: Specifies a comma-separated list of timeslot items. An item can be an individual timeslot
or a timeslot range. Use a hyphen (-) to separate the start and end timeslot numbers of a range. The value
range for the list argument is 1 to 31.
Usage guidelines
A CE1/PRI interface in CE1/PRI mode is physically divided into 32 timeslots numbered 0 through 31.
In actual applications, all the timeslots except timeslot 0 can be bundled into multiple channel sets. For
each channel set, the system automatically creates a serial interface that has the same logical features as
a standard synchronous serial interface.
The serial interface is numbered in the form of serial interface-number:set-number, where
interface-number is the number of the CE1/PRI interface, and set-number is the number of the channel
set.
The timeslots on a CE1/PRI interface can be bundled into either channel sets or a PRI set, but not both at
the same time. Do not use this command together with the pri-set command.
Examples
# Bundle timeslots 1, 2, 5, 10 through 15, and 18 on E1 2/3/0 into channel set 0.
<Sysname> system-view
[Sysname] controller e1 2/3/0
[Sysname-E1 2/3/0] channel-set 0 timeslot-list 1,2,5,10-15,18
Related commands
pri-set
clock (CE1/PRI interface)
Use clock to set the clock mode of a CE1/PRI interface.
Use undo clock to restore the default.