R0106-HP MSR Router Series Interface Configuration Guide(V7)

63
Ste
p
Command Remarks
13. (Optional.) Enable SHDSL line
probing.
shdsl line-probing enable
By default, SHDSL line probing is
enabled.
14. Configure the expected
bandwidth for the interface.
bandwidth bandwidth-value
By default, the expected bandwidth
(in kbps) is calculated with the
following formula: Interface baud
rate/1000.
15. Configure an MTU value for the
interface.
mtu size
By default, the MTU value for the
interface is 1500 bytes.
16. (Optional.) Restore the default of
the interface.
default N/A
17. Bring up the interface.
undo shutdown
By default, the interface is up.
Configuring an EFM subinterface
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an EFM subinterface
and enter its view.
interface efm
interface-number.subnumber
By default, no EFM subinterface is
created.
3. Configure the subinterface
description.
description text
By default, the description is
interface-name Interface.
4. Configure the expected
bandwidth for the
subinterface.
bandwidth bandwidth-value
By default, the expected bandwidth
(in kbps) is calculated with the
following formula: Interface baud
rate/1000.
5. Configure an MTU value for
the subinterface.
mtu size
By default, the MTU value for the
subinterface is 1500 bytes.
6. Restore the default of the
interface.
default N/A
7. Bring up the subinterface.
undo shutdown By default, the subinterface is up.
Displaying and maintaining ATM interfaces
Execute display commands in any view and reset commands in user view.
Task Command
Display information about an ATM
interface.
display interface [ atm [ interface-number ] ] [ brief [ description |
down ] ]
Display information about an EFM
interface.
display interface [ efm [ interface-number ] ] [ brief [ description |
down ] ]
Display DSL configuration
information.
display dsl configuration interface atm interface-number
Display DSL status information. display dsl status interface atm interface-number