R0106-HP MSR Router Series IP Multicast Command Reference(V7)

92
Field Descri
p
tion
Link: ADM - administratively
down; Stby - standby
Physical link state of the interface:
• UP—The link is up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To recover its
physical state, use the undo shutdown command.
• Stby—The link is a backup link. To display information about the primary
interface, use the display interface-backup command.
Protocol: (s) - spoofing
If Protocol field of the interface contains "(s)", it means one of the following
conditions:
• The data link protocol state of the interface is UP, but no link is present on
the interface.
• The link is created on demand.
Typically, null interfaces or loopback interfaces have this attribute.
Protocol
Protocol connection state of the interface. This field always displays double
hyphens (--).
Main IP IP address of the interface. This field always displays double hyphens (--).
Cause
Causes why the physical state of the interface is down. This field always
displays Not connected.
display pim bsr-info
Use display pim bsr-info to display BSR information in the PIM-SM domain.
Syntax
display pim [ vpn-instance vpn-instance-name ] bsr-info
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays BSR information on
the public network.
Examples
# Display BSR information in the PIM-SM domain on the public network.
<Sysname> display pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:44
Elected BSR address: 12.12.12.1
Priority: 64
Hash mask length: 30