R0106-HP MSR Router Series IP Multicast Command Reference(V7)

94
Syntax
display pim [ vpn-instance vpn-instance-name ] claimed-route [ source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays information about
all routes that PIM uses on the public network.
source-address: Specifies a multicast source by its IP address. If you do not specify any multicast source,
the command displays information about all routes that PIM uses.
Examples
# Display information about all routes that PIM uses on the public network.
<Sysname> display pim claimed-route
RPF-route selecting rule: longest-match
Route/mask: 7.11.0.0/16 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7.11.0.10, 225.1.1.1)
(7.11.0.10, 226.1.1.1)
(7.11.0.10, 227.1.1.1)
(*, 228.1.1.1)
Route/mask: 7.12.0.0/16 (multicast static)
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.3,
Config NextHop: 8.0.0.5
Total number of (S,G) or (*,G) dependent on this route entry: 2
(7.12.0.10, 226.1.1.1)
(7.12.0.10, 225.1.1.1)
Table 29 Command output
Field Descri
p
tion
Route/mask
Route entry. Route types in parentheses include:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Direct unicast route.
• unicast—Other unicast route, such as static unicast route.
• mbgp—MBGP route.
• multicast static—Static multicast route.
RPF interface Name of the RPF interface.
RPF neighbor IP address of the RPF neighbor.