R0106-HP MSR Router Series IP Multicast Command Reference(V7)

100
Examples
# Display brief information about all PIM neighbors on the public network.
<Sysname> display pim neighbor
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires DR-Priority Mode
10.1.1.2 GE2/1/1 02:50:49 00:01:31 1 B
20.1.1.2 GE2/1/2 02:49:39 00:01:42 1
# Display detailed information about the PIM neighbor with the IP address 11.110.0.20 on the public
network.
<Sysname> display pim neighbor 11.110.0.20 verbose
Neighbor: 11.110.0.20
Interface: GigabitEthernet2/1/3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Bidirectional PIM: Enabled
Table 34 Command output
Field Descri
p
tion
Neighbor IP address of the PIM neighbor.
Interface Interface that connect to the PIM neighbor.
Uptime Length of time the PIM neighbor has been up.
Expires/Expiry time
Time remaining of the PIM neighbor lifetime. If the PIM neighbor is always
up and reachable, this field displays never.
DR-Priority/DR Priority Priority of the PIM neighbor.
Mode
PIM mode. If the PIM mode is BIDIR-PIM, this field displays B. If a PIM
mode other than BIDIR-PIM is used, this field is blank.
Generation ID
Generation ID of the PIM neighbor. (A random value represents a status
change of the PIM neighbor.)
Holdtime
Lifetime of the PIM neighbor. If the PIM neighbor is always up and
reachable, this field displays forever.
LAN delay Delay for sending prune messages.
Override interval Interval between two override messages.
State refresh interval
Interval for refreshing state. This field is displayed only when the PIM
neighbor operates in PIM-DM mode and the state refresh capability is
enabled.
Neighbor tracking Neighbor tracking status: enabled/disabled.