R0106-HP MSR Router Series IP Multicast Command Reference(V7)

101
Field Descri
p
tion
Bidirectional PIM Whether BIDIR-PIM is enabled.
display pim routing-table
Use display pim routing-table to display PIM routing table information.
Syntax
display pim [ vpn-instance vpn-instance-name ] routing-table [ group-address [ mask { mask-length |
mask } ] | source-address [ mask { mask-length | mask } ] | flags flag-value | fsm | incoming-interface
interface-type interface-number | mode mode-type | outgoing-interface { exclude | include | match }
interface-type interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays PIM routing table
information on the public network.
group-address: Specifies a multicast group by its IP address in the range of 224.0.0.0 to
239.255.255.255. If you do not specify multicast group, the command displays PIM routing entries for all
multicast groups.
source-address: Specifies a multicast source by its IP address.
mask-length: Specifies an address mask length in the range of 0 to 32. The default value is 32.
mask: Specifies an address mask. The default value is 255.255.255.255.
flags flag-value: Specifies a flag. If no flag is specified, the command displays PIM routing entries that
contain all flags. The following lists the values for the flag-value argument and their meanings:
• 2msdp: Specifies PIM routing entries to be contained in the next SA message to notify an MSDP
peer.
• act: Specifies PIM routing entries that have been used for routing data.
• del: Specifies PIM routing entries to be deleted.
• exprune: Specifies PIM routing entries that contain outgoing interfaces pruned by other multicast
routing protocols.
• ext: Specifies PIM routing entries that contain outgoing interfaces provided by other multicast
routing protocols.
• loc: Specifies PIM routing entries on the devices that reside on the same subnet as the multicast
source.
• msdp: Specifies PIM routing entries learned from MSDP SA messages.
• niif: Specifies PIM routing entries that contain unknown incoming interfaces.
• nonbr: Specifies PIM routing entries with PIM neighbor lookup failure.