R0106-HP MSR Router Series IP Multicast Command Reference(V7)

102
• rpt: Specifies PIM routing entries on the RPT branches where (S, G) prunes have been sent to the RP.
• rq: Specifies PIM routing entries of the receiving side of the switch-MDT switchover.
• spt: Specifies PIM routing entries on the SPT.
• sq: Specifies PIM routing entries of the originator side of switch-MDT switchover.
• swt: Specifies PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify any incoming interface, the command displays PIM routing entries that contain all incoming
interfaces.
mode mode-type: Specifies a PIM mode. If you do not specify any PIM mode, the command displays PIM
routing entries in all PIM modes. The available PIM modes include:
• bidir: Specifies BIDIR-PIM.
• dm: Specifies PIM-DM.
• sm: Specifies PIM-SM.
• ssm: Specifies PIM-SSM.
outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing
interface. If you do not specify any outgoing interface, the command displays PIM routing entries that
contain all outgoing interfaces. Whether an outgoing interface is contained in the PIM routing table
depends on the following conditions:
• If you specify an excluded interface, the command displays PIM routing entries that do not contain
the specified outgoing interface.
• If you specify an included interface, the command displays PIM routing entries that contain the
specified outgoing interface.
• If you specify a matching interface, the command displays PIM routing entries that contain only the
specified outgoing interface.
Examples
# Display PIM routing table information on the public network.
<Sysname> display pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(172.168.0.12, 227.0.0.1)
RP: 2.2.2.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: GigabitEthernet2/1/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47