R0106-HP MSR Router Series IP Multicast Command Reference(V7)

105
3.3.3.3 2002 pim-sm No
3.3.3.4 pim-sm No
3.3.3.5 2002 pim-sm Yes
Anycast-RP information:
RP address Member address State
3.3.3.5 1.1.0.1 Active
3.3.3.5 1.1.0.2 Local
3.3.3.5 1.2.0.1 Remote
Table 36 Command output
Field Descri
p
tion
Group/MaskLen Multicast group to which the RP is designated.
[B]
The RP provides services for multicast groups in the BIDIR-PIM domain. If this field
is not displayed, the RP provides services for groups in the PIM-SM domain.
(local) Local address. This field is not displayed if the IP address is not a local address.
Priority Priority of the RP.
HoldTime RP lifetime.
Uptime Length of time the RP has been up.
Expires Remaining lifetime for the RP.
Preferred Whether the static RP is preferred.
Configured ACL/ACL ACL defining the multicast groups to which the static RP is designated.
Mode RP service mode, PIM-SM or BIDIR-PIM.
RP mapping for this group IP address of the RP that provides services for the multicast group.
Anycast-RP 3.3.3.5
members
Members of Anycast RP 3.3.3.5.
Member address IP address of the Anycast RP member.
State
State of the interface from which the member address originates:
• Active—Activated local interface.
• Local—Inactivated local interface.
• Remote—Remote interface.
display pim statistics
Use display pim statistics to display statistics for PIM packets.
Syntax
display pim statistics
Views
Any view
Predefined user roles
network-admin