R0106-HP MSR Router Series IP Multicast Command Reference(V7)

116
pim hello-option lan-delay
Use pim hello-option lan-delay to set the prune delay on an interface.
Use undo pim hello-option lan-delay to restore the default.
Syntax
pim hello-option lan-delay delay
undo pim hello-option lan-delay
Default
The prune delay is 500 milliseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
delay: Sets the prune delay in the range of 1 to 32767 milliseconds.
Usage guidelines
You can set the prune delay in PIM view or interface view. The configurations made in PIM view are
effective on all interfaces. The configurations made in interface view are effective on only the current
interface. If you set the prune delay in both PIM view and interface view, the configuration in interface
view always takes precedence.
Examples
# Set the prune delay to 200 milliseconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim hello-option lan-delay 200
Related commands
• hello-option lan-delay (PIM view)
• hello-option override-interval (PIM view)
• pim hello-option override-interval
pim hello-option neighbor-tracking
Use pim hello-option neighbor-tracking to enable the neighbor tracking function on an interface and
disable the join message suppression function on that interface.
Use pim hello-option neighbor-tracking disable to disable the neighbor tracking function on an interface
when the neighbor tracking function is enabled globally.
Use undo pim hello-option neighbor-tracking to restore the neighbor tracking function on an interface to
be consistent with the global setting.
Syntax
pim hello-option neighbor-tracking
pim hello-option neighbor-tracking disable