R0106-HP MSR Router Series IP Multicast Command Reference(V7)

4
<Sysname> display igmp-snooping group vlan 2 verbose
Total 1 entries.
VLAN 2: Total 1 entries.
(0.0.0.0, 224.1.1.1)
Attribute: local port
FSM information: normal
Host slots (0 in total):
Host ports (1 in total):
GE2/1/0 (00:03:23)
Table 2 Command output
Field Descri
p
tion
Total 1 entries Total number of dynamic IGMP snooping forwarding entries.
VLAN 2: Total 1 entries Total number of dynamic IGMP snooping forwarding entries in VLAN 2.
(0.0.0.0, 224.1.1.1)
(S, G) entry. If the multicast source is not specified, the field in the S position
displays 0.0.0.0.
Attribute
Entry attribute:
• global port—The entry has a global port.
• local port—The entry has a port that resides on the specified card.
• slot—The entry has a port that resides on a card other than the specified card.
FSM information
Finite state machine information of the entry:
• delete—The entry attributes have been deleted.
• dummy—The entry is a new temporary entry.
• no info—No entry exists.
• normal—The entry is a normal entry.
Host slots (0 in total)
Slot IDs of the cards where member ports reside and total number of the cards. If
member ports reside on the specified card, the slot ID of the card is not displayed.
This field is displayed only on the MSR4000.
Host ports (1 in total) Member ports and total number of the member ports.
(00:03:23)
Remaining aging time for the dynamic member port. This field is always
displayed for a global port. For a non-global port:
• On the MSR2000 or MSR3000, this field is always displayed.
• On the MSR4000, this field is displayed if the port is on the MPU. Otherwise,
you must specify the slot slot-number option to display this field.
Related commands
reset igmp-snooping group
display igmp-snooping router-port
Use display igmp-snooping router-port to display information about dynamic router ports.
Syntax
MSR2000/MSR3000:
display igmp-snooping
router-port [ vlan vlan-id ]