R0106-HP MSR Router Series IP Multicast Command Reference(V7)

121
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim sm
Related commands
multicast routing
pim state-refresh-capable
Use pim state-refresh-capable to enable the state refresh feature on an interface.
Use undo pim state-refresh-capable to disable the state refresh feature.
Syntax
pim state-refresh-capable
undo pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable state refresh on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] undo pim state-refresh-capable
Related commands
• state-refresh-interval (PIM view)
• state-refresh-rate-limit (PIM view)
• state-refresh-ttl (PIM view)
pim timer graft-retry
Use pim timer graft-retry to set the graft retry timer.
Use undo pim timer graft-retry to restore the default.
Syntax
pim timer graft-retry interval
undo pim timer graft-retry
Default
The graft retry timer is 3 seconds.
Views
Interface view