R0106-HP MSR Router Series IP Multicast Command Reference(V7)

122
Predefined user roles
network-admin
Parameters
interval: Specifies a graft retry timer in the range of 1 to 65535 seconds.
Examples
# Set the graft retry timer to 80 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim timer graft-retry 80
pim timer hello
Use pim timer hello to set the interval for sending hello messages on an interface.
Use undo pim timer hello to restore the default.
Syntax
pim timer hello interval
undo pim timer hello
Default
The interval for sending hello messages is 30 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets the interval for sending hello messages, in the range of 0 to 18000 seconds. If you set the
value to 0, no hello messages are sent.
Usage guidelines
You can set the interval for sending hello messages in PIM view or interface view. The configurations
made in PIM view are effective on all interfaces. The configurations made in interface view are effective
on only the current interface. If you set the interval in both PIM view and interface view, the configuration
in interface view always takes precedence.
Examples
# Set the interval for sending hello messages to 40 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim timer hello 40
Related commands
timer hello (PIM view)