R0106-HP MSR Router Series IP Multicast Command Reference(V7)

5
MSR4000:
display igmp-snooping
router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
slot slot-number: Specifies a card by its slot number. If you do not specify any card, the command
displays information about the dynamic router ports on the MPU. (MSR4000)
Examples
# Display information about the dynamic router ports for VLAN 2.
<Sysname> display igmp-snooping router-port vlan 2
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
GE2/1/1 (00:01:30)
GE2/1/2 (00:00:23)
Table 3 Command output
Field Descri
p
tion
VLAN 2 VLAN ID.
Router slots (0 in total)
Slot IDs of the cards where dynamic router ports reside and total number of the
cards. If router ports reside on the specified card, the slot ID of the card is not
displayed.
This field is displayed only on the MSR4000.
Router ports (2 in total) Dynamic router ports and total number of the dynamic router ports.
(00:01:30)
Remaining aging time for the dynamic router port. This field is always displayed for
a global port. For a non-global port:
• On the MSR2000 or MSR3000, this field is always displayed.
• On the MSR4000, this field is displayed if the port is on the MPU. Otherwise, you
must specify the slot slot-number option to display this field.
Related commands
reset igmp-snooping router-port
display igmp-snooping static-group
Use display igmp-snooping static-group to display information about static IGMP snooping forwarding
entries.
Syntax
MSR2000/MSR3000: