R0106-HP MSR Router Series IP Multicast Command Reference(V7)

131
Views
PIM view
Predefined user roles
network-admin
Parameters
time: Specifies a time that the device waits before accepting a new refresh message, in the range of 1 to
65535 seconds.
Examples
# Configure the device to wait 45 seconds before it accepts a new state refresh message on the public
network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] state-refresh-rate-limit 45
Related commands
• pim state-refresh-capable
• state-refresh-interval (PIM view)
• state-refresh-ttl (PIM view)
state-refresh-ttl (PIM view)
Use state-refresh-ttl to set the TTL value of state refresh messages.
Use undo state-refresh-ttl to restore the default.
Syntax
state-refresh-ttl ttl-value
undo state-refresh-ttl
Default
The TTL value of state refresh messages is 255.
Views
PIM view
Predefined user roles
network-admin
Parameters
ttl-value: Specifies a TTL value of state refresh messages, in the range of 1 to 255.
Examples
# Set the TTL value of state refresh messages to be 45 on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] state-refresh-ttl 45
Related commands
• pim state-refresh-capable (PIM view)