R0106-HP MSR Router Series IP Multicast Command Reference(V7)

141
Usage guidelines
This command gives the corresponding output only after you execute the cache-sa-enable command.
Examples
# Display information about the (S, G) entries in the SA cache on the public network.
<Sysname> display msdp sa-cache
Total Source-Active Cache - 5 entries
Matched 5 entries
Source Group Origin RP Pro AS Uptime Expires
10.10.1.2 225.0.0.1 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.2 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.3 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.4 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.5 10.10.10.10 BGP 100 00:00:11 00:05:49
Table 40 Command output
Field Descri
p
tion
Total Source-Active Cache Total number of multicast sources in the SA cache.
Matched Total number of matching multicast sources by MSDP.
Source Multicast source address.
Group Multicast group address.
Origin RP Address of the RP that generated the (S, G) entry.
Pro
Type of protocol from which the AS number of the origin RP
originates. If the system could not obtain the AS number, this field
displays a question mark (?).
AS
AS number of the origin RP. If the system could not obtain the AS
number, this field displays a question mark (?).
Uptime Length of time for which the cached (S, G) entry has existed.
Expires Length of time in which the cached (S, G) entry will expire.
Related commands
cache-sa-enable
display msdp sa-count
Use display msdp sa-count to display the number of (S, G) entries in the SA cache.
Syntax
display msdp [ vpn-instance vpn-instance-name ] sa-count [ as-number ]
Views
Any view
Predefined user roles
network-admin