R0106-HP MSR Router Series IP Multicast Command Reference(V7)

142
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays the number of (S,
G) entries in the SA cache on the public network.
as-number: Specifies an AS number in the range of 1 to 4294967295. If you do not specify any AS
number, the command displays the number of (S, G) entries in the SA cache of all ASs.
Usage guidelines
This command displays the output only after you execute the cache-sa-enable command.
Examples
# Display the number of (S, G) entries in the SA cache on the public network.
<Sysname> display msdp sa-count
(S, G) entries statistics, counted by peer
Peer address SA count
10.10.10.10 5
(S, G) entries statistics, counted by AS
AS Source count Group count
? 3 3
5 (S, G) entries in total
Table 41 Command output
Field Descri
p
tion
(S, G) entries statistics, counted by peer Number of (S, G) entries on an MSDP peer basis.
Peer address Address of the MSDP peer that sent SA messages.
SA count Number of (S, G) entries from this MSDP peer.
(S, G) entries statistics, counted by AS Number of cached (S, G) entries on an AS basis.
AS
AS number. If the system could not obtain the AS number, this
field displays a question mark (?).
Source count Number of multicast sources from this AS.
Group count Number of multicast groups from this AS.
(S, G) entries in total Total number of (S, G) entries.
Related commands
cache-sa-enable
encap-data-enable
Use encap-data-enable to enable multicast data encapsulation in SA messages.
Use undo encap-data-enable to restore the default.
Syntax
encap-data-enable