R0106-HP MSR Router Series IP Multicast Command Reference(V7)

145
Use undo originating-rp to remove the configuration.
Syntax
originating-rp interface-type interface-number
undo originating-rp
Default
The PIM RP address is used as the RP address of SA messages.
Views
MSDP view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# On the public network, specify the IP address of GigabitEthernet 2/1/1 as the RP address of SA
messages.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] originating-rp gigabitethernet 2/1/1
peer connect-interface
Use peer connect-interface to create an MSDP peering connection.
Use undo peer connect-interface to remove an MSDP peering connection.
Syntax
peer peer-address connect-interface interface-type interface-number
undo peer peer-address
Default
MSDP peering connection is not created.
Views
MSDP view
Predefined user roles
network-admin
Parameters
peer-address: Specifies an MSDP peer.
interface-type interface-number: Specifies an interface by its type and number. The local device uses the
primary IP address of the specified interface as the source IP address when setting up a TCP connection
with the remote MSDP peer.