R0106-HP MSR Router Series IP Multicast Command Reference(V7)

151
[Sysname-acl-adv-3100] rule permit ip source 170.15.0.0 0.0.255.255 destination 225.1.0.0
0.0.255.255
[Sysname-acl-adv-3100] quit
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface gigabitethernet 2/1/1
[Sysname-msdp] peer 125.10.7.6 sa-policy export acl 3100
Related commands
• display msdp peer-status
• import-source
peer sa-request-policy
Use peer sa-request-policy to configure a filtering rule for SA request messages.
Use undo peer sa-request-policy to remove the configured SA request filtering rule.
Syntax
peer peer-address sa-request-policy [ acl acl-number ]
undo peer peer-address sa-request-policy
Default
SA request messages are not filtered.
Views
MSDP view
Predefined user roles
network-admin
Parameters
peer-address: Specifies an MSDP peer by its address.
acl-number: Specifies an IPv4 basic ACL number in the range of 2000 to 2999. If you specify an ACL,
the device processes only the SA requests with the multicast group addresses that match the ACL rule.
Other SA requests are ignored. If you do not specify any ACL, all SA requests are ignored.
Examples
# On the public network, configure an ACL rule to permit SA requests with multicast group addresses in
the range of 225.1.1.0/24. The MSDP peer 175.58.6.5 processes only the SA requests that match the
ACL rule.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 225.1.1.0 0.0.0.255
[Sysname-acl-basic-2001] quit
[Sysname] msdp
[Sysname-msdp] peer 175.58.6.5 sa-request-policy acl 2001
reset msdp peer
Use reset msdp peer to reset the TCP connection with an MSDP peer and clear statistics for the MSDP
peer.