R0106-HP MSR Router Series IP Multicast Command Reference(V7)

154
Related commands
• display msdp brief
• display msdp peer-status
static-rpf-peer
Use static-rpf-peer to configure a static RPF peer.
Use undo static-rpf-peer to remove a static RPF peer.
Syntax
static-rpf-peer peer-address [ rp-policy ip-prefix-name ]
undo static-rpf-peer peer-address
Default
No static RPF peer is configured.
Views
MSDP view
Predefined user roles
network-admin
Parameters
peer-address: Specifies an MSDP peer by its address.
rp-policy ip-prefix-name: Specifies a filtering policy based on the RP addresses in SA messages. The
ip-prefix-name argument is the filtering policy name, a case-sensitive string of 1 to 63 characters.
Examples
# Configure a static RPF peer on the public network.
<Sysname> system-view
[Sysname] ip prefix-list list1 permit 130.10.0.0 16 great-equal 16 less-equal 32
[Sysname] msdp
[Sysname-msdp] peer 130.10.7.6 connect-interface gigabitethernet 2/1/1
[Sysname-msdp] static-rpf-peer 130.10.7.6 rp-policy list1
Related commands
• display msdp peer-status
• ip prefix-list
timer keepalive
Use timer keepalive to set the keepalive timer and peer hold timer for an MSDP session.
Use undo timer keepalive to restore the default.
Syntax
timer keepalive keepalive holdtime
undo timer keepalive