R0106-HP MSR Router Series IP Multicast Command Reference(V7)

9
Field Descri
p
tion
reports with right and wrong records Number of IGMP reports with correct and incorrect records.
specific sg queries Number of IGMP group-and-source-specific queries.
error IGMP messages Number of IGMP messages with errors.
Related commands
reset igmp-snooping statistics
display l2-multicast ip
Use display l2-multicast ip to display information about Layer 2 IP multicast groups.
Syntax
MSR2000/MSR3000:
display l2-multicast ip [ group group-address | source source-address ] * [ vlan vlan-id ]
MSR4000:
display l2-multicast ip [ group group-address | source source-address ] * [ vlan vlan-id ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group group-address: Specifies a multicast group by its IP address. If you do not specify any multicast
group, the command displays information about all Layer 2 IP multicast groups.
source source-address: Specifies a multicast source by its IP address. If you do not specify any multicast
source, the command displays information about Layer 2 IP multicast groups for all multicast sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify any VLAN,
the command displays information about Layer 2 IP multicast groups for all VLANs.
slot slot-number: Specifies a card by its slot number. If you do not specify any card, the command
displays information about the Layer 2 IP multicast groups on the MPU. (MSR4000)
Examples
# Display information about the Layer 2 IP multicast groups for VLAN 2.
<Sysname> display l2-multicast ip vlan 2
Total 1 entries.
VLAN 2: Total 1 IP entries.
(0.0.0.0, 224.1.1.1)
Attribute: static, success
Host slots (0 in total):
Host ports (1 in total):