R0106-HP MSR Router Series IP Multicast Command Reference(V7)

171
Attribute: static, success
Host slots (0 in total):
Host ports (1 in total):
GE2/1/1 (S, SUC)
Table 46 Command output
Field Descri
p
tion
Total 1 entries Total number of Layer 2 IPv6 multicast groups.
VLAN 2: Total 1 IP entries Total number of Layer 2 IPv6 multicast groups in VLAN 2.
(::, FF1E::101)
(S, G) entry. If the IPv6 multicast source is not specified, the field in the S
position displays a double colon (::).
Attribute
Entry attribute:
• dynamic—The entry is created by a dynamic protocol.
• static—The entry is created by a static protocol.
• pim—The entry is created by IPv6 PIM.
• kernel—The entry is obtained from the kernel.
• success—Processing succeeds.
• fail—Processing fails.
Host slots (0 in total)
Slot IDs of the cards where the member ports reside and total number of the
cards. If member ports reside on the specified card, the slot ID of the card is not
displayed.
This field is displayed only on the MSR4000.
Host ports (1 in total) Member ports and total number of the member ports.
(S, SUC)
Port attribute:
• D—Dynamic port.
• S—Static port.
• P—IPv6 PIM port.
• K—Port obtained from the kernel.
• R—Port learned from (*, *) entries.
• W—Port learned from (*, G) entries.
• SUC—Processing succeeds.
• F—Processing fails.
display ipv6 l2-multicast ip forwarding
Use display ipv6 l2-multicast ip forwarding to display information about Layer 2 IPv6 multicast group
entries.
Syntax
MSR2000/MSR3000:
display ipv6 l2-multicast ip forwarding [ group ipv6-group-address | source ipv6-source-address ] *
[ vlan vlan-id ]
MSR4000:
display ipv6 l2-multicast ip forwarding [ group ipv6-group-address | source ipv6-source-address ] *
[ vlan vlan-id ] [ slot slot-number ]