R0106-HP MSR Router Series IP Multicast Command Reference(V7)

172
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. If you do not specify
any IPv6 multicast group, the command displays information about the Layer 2 IPv6 multicast group
entries for all IPv6 multicast groups.
source ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify
any IPv6 multicast source, the command displays information about the Layer 2 IPv6 multicast group
entries for all IPv6 multicast sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify any VLAN,
the command displays information about the Layer 2 IPv6 multicast group entries for all VLANs.
slot slot-number: Specifies a card by the number of the slot where the card is inserted. If you do not
specify any card, the command displays information about the Layer 2 IPv6 multicast group entries on
the MPU. (MSR4000)
Examples
# Display information about the Layer 2 IPv6 multicast group entries for VLAN 2.
<Sysname> display ipv6 l2-multicast ip forwarding vlan 2
Total 1 entries.
VLAN 2: Total 1 IP entries.
(::, FF1E::101)
Host slots (0 in total):
Host ports (3 in total):
GE2/1/1
GE2/1/2
GE2/1/3
Table 47 Command output
Field Descri
p
tion
Total 1 entries Total number of Layer 2 IPv6 multicast group entries.
VLAN 2: Total 1 IP entries Total number of Layer 2 IPv6 multicast group entries in VLAN 2.
(::, FF1E::101)
(S, G) entry. If the IPv6 multicast source is not specified, the field in the S
position displays a double colon (::).
Host slots (0 in total)
Slot IDs of the cards where the member ports reside and total number of the
cards. If member ports reside on the specified card, the slot ID of the card is not
displayed.
This field is displayed only on the MSR4000.
Host ports (3 in total) Member ports and total number of the member ports.