R0106-HP MSR Router Series IP Multicast Command Reference(V7)

179
Syntax
MSR2000/MSR3000:
display mld-snooping
router-port [ vlan vlan-id ]
MSR4000:
display mld-snooping
router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
slot slot-number: Specifies a card by the number of the slot where the card is inserted. If you do not
specify any card, the command displays information about the dynamic router ports on MPU.
(MSR4000)
Examples
# Display information about the dynamic router ports in VLAN 2.
<Sysname> display mld-snooping router-port vlan 2
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
GE2/1/1 (00:01:30)
GE2/1/2 (00:00:23)
Table 52 Command output
Field Descri
p
tion
Router slots (0 in total)
Slot IDs of the cards where the dynamic router ports reside and total number of the
cards. If router ports reside on the specified card, the slot ID of the card is not
displayed.
This field is displayed only on the MSR4000.
Router ports (2 in total) Dynamic router ports and total number of the dynamic router ports.
(00:01:30)
Remaining aging time for the dynamic router port. This field is always displayed for
a global port. For a non-global port:
• On the MSR2000 or MSR3000, this field is always displayed.
• On the MSR4000, this field is displayed if the port is on the MPU. Otherwise, you
must specify the slot slot-number option to display this field.
Related commands
reset mld-snooping router-port