R0106-HP MSR Router Series IP Multicast Command Reference(V7)

10
GE2/1/1 (S, SUC)
Table 7 Command output
Field Descri
p
tion
Total 1 entries Total number of Layer 2 IP multicast groups.
VLAN 2: Total 1 IP entries Total number of Layer 2 IP multicast groups in VLAN 2.
(0.0.0.0, 224.1.1.1)
(S, G) entry. If the multicast source is not specified, the field in the S position
displays 0.0.0.0.
Attribute
Entry attribute:
• dynamic—The entry is created by a dynamic protocol.
• static—The entry is created by a static protocol.
• pim—The entry is created by PIM.
• kernel—The entry is obtained from the kernel.
• success—Processing succeeds.
• fail—Processing fails.
Host slots (0 in total)
Slot IDs of the cards where member ports reside and total number of the cards.
If member ports reside on the specified card, the slot ID of the card is not
displayed.
This field is displayed only on the MSR4000.
Host ports (1 in total) Member ports and total number of the member ports.
(S, SUC)
Port attribute:
• D—Dynamic port.
• S—Static port.
• P—PIM port.
• K—Port obtained from the kernel.
• R—Port learned from (*, *) entries.
• W—Port learned from (*, G) entries.
• SUC—Processing succeeds.
• F—Processing fails.
display l2-multicast ip forwarding
Use display l2-multicast ip forwarding to display information about Layer 2 IP multicast group entries.
Syntax
MSR2000/MSR3000:
display l2-multicast ip forwarding [ group group-address | source source-address ] * [ vlan vlan-id ]
MSR4000:
display l2-multicast ip forwarding [ group group-address | source source-address ] * [ vlan vlan-id ]
[ slot slot-number ]
Views
Any view