R0106-HP MSR Router Series IP Multicast Command Reference(V7)

183
Table 55 Command output
Field Descri
p
tion
general queries Number of MLD general queries.
specific queries Number of MLD multicast-address-specific queries.
reports Number of MLD reports.
dones Number of MLD done messages.
reports with right and wrong records Number of MLD reports with correct and incorrect records.
specific sg queries Number of MLD multicast-address-and-source-specific queries.
error MLD messages Number of MLD messages with errors.
Related commands
reset mld-snooping statistics
dot1p-priority (MLD-snooping view)
Use dot1p-priority to set the 802.1p precedence for MLD messages globally.
Use undo dot1p-priority to restore the default.
Syntax
dot1p-priority priority-number
undo dot1p-priority
Default
The 802.1p precedence for MLD messages is not configured.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
priority-number: Specifies an 802.1p precedence for MLD messages, in the range of 0 to 7. A higher
value means a higher precedence.
Usage guidelines
The global configuration takes effect on all VLANs. It has lower priority than the configuration made in
a specific VLAN.
Examples
# Set the 802.1p precedence for MLD messages to 3 globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] dot1p-priority 3
Related commands
mld-snooping dot1p-priority