R0106-HP MSR Router Series IP Multicast Command Reference(V7)

185
Parameters
limit: Specifies the global maximum number of MLD snooping forwarding entries, in the range of 0 to
4294967295.
Examples
# Set the global maximum number of MLD snooping forwarding entries to 512.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] entry-limit 512
fast-leave (MLD-snooping view)
Use fast-leave to enable MLD snooping fast-leave processing globally.
Use undo fast-leave to disable MLD snooping fast-leave processing globally.
Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
Default
MLD snooping fast-leave processing is globally disabled.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If you do not specify any VLAN, the command takes effect for all VLANs.
Usage guidelines
This feature enables the switch to immediately remove the port that receives an MLD done message from
the forwarding entry for the multicast group specified in the done message.
The global configuration is effective on all ports. It has lower priority than the configuration made on a
specific port.
Examples
# Enable MLD snooping fast-leave processing globally for VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] fast-leave vlan 2
Related commands
mld-snooping fast-leave