R0106-HP MSR Router Series IP Multicast Command Reference(V7)

188
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
interval: Sets the MLD last listener query interval in the range of 1 to 5 seconds.
Usage guidelines
The MLD last listener query interval determines the interval for sending MLD multicast-address-specific
queries and the maximum response time for MLD multicast-address-specific queries.
The global configuration is effective on all VLANs. It has lower priority than the configuration made in a
specific VLAN.
Examples
# Set the global MLD last listener query interval to 3 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] last-listener-query-interval 3
Related commands
mld-snooping last-listener-query-interval
max-response-time (MLD-snooping view)
Use max-response-time to set the global maximum response time for MLD general queries.
Use undo max-response-time to restore the default.
Syntax
max-response-time interval
undo max-response-time
Default
The global maximum response time for MLD general queries is 10 seconds.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
interval: Sets the maximum response time for MLD general queries, in the range of 1 to 25 seconds.
Usage guidelines
The global configuration is effective on all VLANs. It has lower priority than the configuration made in a
specific VLAN.
To avoid mistakenly deleting IPv6 multicast group members, configure the MLD general query interval to
be greater than the maximum response time for MLD general queries.