R0106-HP MSR Router Series IP Multicast Command Reference(V7)

197
[Sysname-GigabitEthernet2/1/1] mld-snooping host-join ff3e::101 source-ip 2002::22 vlan
2
mld-snooping host-aging-time
Use mld-snooping host-aging-time to set the aging timer for the dynamic member ports in a VLAN.
Use undo mld-snooping host-aging-time to restore the default.
Syntax
mld-snooping host-aging-time interval
undo mld-snooping host-aging-time
Default
The aging timer for the dynamic member ports in a VLAN is 260 seconds.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interval: Sets an aging timer for the dynamic member ports, in the range of 200 to 1000 seconds.
Usage guidelines
You must enable MLD snooping for a VLAN before you configure this command for the VLAN.
The configuration made in VLAN view is only effective on the current VLAN. It has higher priority than the
global configuration.
Examples
# In VLAN 2, enable MLD snooping, and set the aging timer for the dynamic member ports to 300
seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping host-aging-time 300
Related commands
• host-aging-time (MLD-snooping view)
• mld-snooping enable
mld-snooping last-listener-query-interval
Use mld-snooping last-listener-query-interval to set the MLD last listener query interval for a VLAN.
Use undo mld-snooping last-listener-query-interval to restore the default.
Syntax
mld-snooping last-listener-query-interval interval