R0106-HP MSR Router Series IP Multicast Command Reference(V7)

202
undo mld-snooping report source-ip
Default
The source IPv6 address for MLD reports is the IPv6 link-local address of current VLAN interface. If the
current VLAN interface does not have an IPv6 link-local address, the source IPv6 address is
FE80::02FF:FFFF:FE00:0001.
Views
VLAN view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies a source IPv6 address for the MLD reports. It can be any legal IPv6 link-local
address.
Usage guidelines
You must enable MLD snooping for a VLAN before you execute this command in the VLAN.
Examples
# In VLAN 2, enable MLD snooping, and configure the source IPv6 address for the MLD reports to
FE80:0:0:1::1.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping report source-ip fe80:0:0:1::1
Related commands
mld-snooping enable
mld-snooping router-aging-time
Use mld-snooping router-aging-time to set the aging timer for the dynamic router ports in a VLAN.
Use undo mld-snooping router-aging-time to restore the default.
Syntax
mld-snooping router-aging-time interval
undo mld-snooping router-aging-time
Default
The aging timer for the dynamic router ports in a VLAN is 260 seconds.
Views
VLAN view
Predefined user roles
network-admin