R0106-HP MSR Router Series IP Multicast Command Reference(V7)

205
Syntax
mld-snooping special-query source-ip ipv6-address
undo mld-snooping special-query source-ip
Default
If the MLD snooping querier has received MLD general queries, the source IP address of MLD
multicast-address-specific queries is the IPv6 address of the MLD general queries. Otherwise, it is the IPv6
link-local address of the current VLAN interface. If there is no IPv6 link-local address for the current VLAN
interface, the source IPv6 address is FE80::02FF:FFFF:FE00:0001.
Views
VLAN view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies an IPv6 link-local address.
Usage guidelines
Enable MLD snooping for a VLAN before you execute this command in the VLAN.
Examples
# In VLAN 2, enable MLD snooping, and specify FE80:0:0:1::1 as the source IPv6 address of MLD
multicast-address-specific queries.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping special-query source-ip fe80:0:0:1::1
Related commands
mld-snooping enable
mld-snooping static-group
Use mld-snooping static-group to configure a port as a static member port of an IPv6 multicast group.
Use undo mld-snooping static-group to restore the default.
Syntax
mld-snooping static-group ipv6-group-address [ source-ip ipv6-source-address ] vlan vlan-id
undo mld-snooping static-group ipv6-group-address [ source-ip ipv6-source-address ] { all | vlan
vlan-id }
Default
A port is not a static member port of any IPv6 multicast group or IPv6 multicast source and group.
Views
Layer 2 Ethernet interface view