R0106-HP MSR Router Series IP Multicast Command Reference(V7)

207
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
Examples
# Configure GigabitEthernet 2/1/1 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mld-snooping static-router-port vlan 2
mld-snooping version
Use mld-snooping version to specify the MLD snooping version for a VLAN.
Use undo mld-snooping version to restore the default.
Syntax
mld-snooping version version-number
undo mld-snooping version
Default
The MLD snooping version in a VLAN is 1.
Views
VLAN view
Predefined user roles
network-admin
Parameters
version-number: Specifies an MLD snooping version, 1 or 2.
Usage guidelines
You must enable MLD snooping for a VLAN before you configure this command for the VLAN.
Examples
# In VLAN 2, enable MLD snooping, and specify the MLD snooping as 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
Related commands
mld-snooping enable
overflow-replace (MLD-snooping view)
Use overflow-replace to enable the IPv6 multicast group replacement function globally.
Use undo overflow-replace to disable the IPv6 multicast group replacement function globally.
Syntax
overflow-replace [ vlan vlan-list ]