R0106-HP MSR Router Series IP Multicast Command Reference(V7)

214
Table 56 Command output
Field Descri
p
tion
Interface Interface name.
Index Index number of the interface.
Current state Current status of the interface: up or down.
MTU MTU value.
Type
Interface type:
• BROADCAST—Broadcast link interface.
• P2P—P2P interface.
• LOOP—Loopback interface.
• REGISTER—Register interface.
• NBMA—NBMA interface.
• MTUNNEL—Multicast tunnel interface.
Protocol Protocol running on the interface: PIM-DM, PIM-SM, MLD or PROXY.
PIM protocol state Whether IPv6 PIM is enabled: Enabled or Disabled.
Address list Interface address list.
Local address Local IP address.
Remote address Remote end IP address. This field is displayed when the interface is vlink type.
Reference Number of times that the address has been referenced.
State Status of the interface address: NORMAL or DEL.
display ipv6 multicast boundary
Use display ipv6 multicast boundary to display IPv6 multicast boundary information.
Syntax
display ipv6 multicast [ vpn-instance vpn-instance-name ] boundary { group [ ipv6-group-address
[ prefix-length ] ] | scope [ scope-id ] } [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays IPv6 multicast
boundary information on the public network.
group: Displays the IPv6 multicast boundary information for the specified group.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where "x" and
"y" represent any hexadecimal numbers from 0 to F. If you do not specify any IPv6 multicast group , the
command displays the IPv6 multicast boundary information of all IPv6 multicast groups.