R0106-HP MSR Router Series IP Multicast Command Reference(V7)

14
Field Descri
p
tion
Host slots (0 in total)
Slot IDs of the cards where member ports reside and total number of the
cards. If member ports reside on the specified card, the slot ID of the card is
not displayed.
This field is displayed only on the MSR4000.
Host ports (3 in total) Member ports and total number of the member ports.
dot1p-priority (IGMP-snooping view)
Use dot1p-priority to set the 802.1p precedence for IGMP messages globally.
Use undo dot1p-priority to restore the default.
Syntax
dot1p-priority priority-number
undo dot1p-priority
Default
The 802.1p precedence for IGMP messages is not configured.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
priority-number: Specifies an 802.1p precedence for IGMP messages, in the range of 0 to 7. A higher
number means a higher precedence.
Usage guidelines
The global configuration is effective on all VLANs. It has lower priority than the configuration made in a
specific VLAN.
Examples
# Set the 802.1p precedence for IGMP messages to 3 globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] dot1p-priority 3
Related commands
igmp-snooping dot1p-priority
enable (IGMP-snooping view)
Use enable to enable IGMP snooping for VLANs.
Use undo enable to disable IGMP snooping for VLANs.
Syntax
enable vlan vlan-list