R0106-HP MSR Router Series IP Multicast Command Reference(V7)

227
Use multicast load-splitting to restore the default.
Syntax
load-splitting { source | source-group }
undo load-splitting
Default
Load splitting of IPv6 multicast traffic is disabled.
Views
IPv6 MRIB view
Predefined user roles
network-admin
Parameters
source: Specifies IPv6 multicast load splitting on a per-source basis.
source-group: Specifies IPv6 multicast load splitting on a per-source basis and on a per-group basis.
Examples
# Enable load splitting of IPv6 multicast traffic on a per-source basis on the public network.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] load-splitting source
longest-match (IPv6 MRIB view)
Use longest-match to configure RPF route selection based on the longest prefix match principle.
Use undo longest-match to restore the default.
Syntax
longest-match
undo longest-match
Default
The route with the highest priority is selected as the RPF route.
Views
IPv6 MRIB view
Predefined user roles
network-admin
Examples
# Configure RPF route selection based on the longest prefix match principle on the public network.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] longest-match