R0106-HP MSR Router Series IP Multicast Command Reference(V7)

228
reset ipv6 multicast forwarding event
Use reset ipv6 multicast forwarding event to clear statistics for IPv6 multicast forwarding events.
Syntax
reset ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding event
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command clears statistics for the IPv6
multicast forwarding events on the public network.
Examples
# Clear statistics for the IPv6 multicast forwarding events on the public network.
<Sysname> reset ipv6 multicast forwarding event
Usage guidelines
display ipv6 multicast forwarding event
reset ipv6 multicast forwarding-table
Use reset ipv6 multicast forwarding-table to clear IPv6 multicast forwarding entries.
Syntax
reset ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding-table { { ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] | incoming-interface { interface-type
interface-number } } * | all }
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command clears IPv6 multicast
forwarding entries on the public network.
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where "x" and
"y" represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies an address prefix length. The default value is 128. For an IPv6 multicast group
address, the value range for this argument is 8 to 128. For an IPv6 multicast source address, the value
range for this argument is 0 to 128.