R0106-HP MSR Router Series IP Multicast Command Reference(V7)

240
display mld ssm-mapping
Use display mld ssm-mapping to display MLD SSM mappings.
Syntax
display mld [ vpn-instance vpn-instance-name ] ssm-mapping ipv6-group-address
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to
31 characters. If you do not specify any VPN instance, the command displays information about MLD
SSM mappings on the public network.
ipv6-group-address: Specifies an IPv6 multicast group, in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal numbers from 0 to F.
Examples
# Display the MLD SSM mappings of the IPv6 multicast group FF1E::101 on the public network.
<Sysname> display mld ssm-mapping ff1e::101
Group: FF1E::101
Source list:
1::1
1::2
10::1
100::10
Table 70 Command output
Fields Descri
p
tion
Group IPv6 multicast group address.
Source list List of IPv6 multicast source addresses.
mld
Use mld to enter MLD view.
Use undo mld to remove the configurations made in MLD view.
Syntax
mld [ vpn-instance vpn-instance-name ]
undo mld [ vpn-instance vpn-instance-name ]
Views
System view