R0106-HP MSR Router Series IP Multicast Command Reference(V7)

241
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to
31 characters. If you do not specify any VPN instance, the command takes effect on the public network.
Examples
# Enter MLD view of the public network.
<Sysname> system-view
[Sysname] mld
[Sysname-mld]
# Enter MLD view of the VPN instance mvpn.
<Sysname> system-view
[Sysname] mld vpn-instance mvpn
[Sysname-mld-mvpn]
mld enable
Use mld enable to enable MLD on an interface.
Use undo mld enable to disable MLD on an interface.
Syntax
mld enable
undo mld enable
Default
MLD is disabled on all interfaces.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
You must enable IPv6 multicast routing before executing this command in the public network or VPN
instance.
You must enable MLD on an interface to make MLD configurations on that interface take effect.
Examples
# Enable IPv6 multicast routing, and enable MLD for GigabitEthernet 2/1/1 on the public network.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mld enable
Related commands
ipv6 multicast routing