R0106-HP MSR Router Series IP Multicast Command Reference(V7)

244
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mld other-querier-present-interval 125
mld proxy enable
Use mld proxy enable to enable MLD proxying on an interface.
Use undo mld proxy enable to disable MLD proxying on the interface.
Syntax
mld proxy enable
undo mld proxy enable
Default
MLD proxying is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
You must enable IPv6 multicast routing before executing this command for the public network or specific
VPN instances.
Examples
# Enable IPv6 multicast routing on the public network, and enable MLD proxying on GigabitEthernet
2/1/1.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mld proxy enable
Related commands
ipv6 multicast routing
mld proxy forwarding
Use mld proxy forwarding to enable IPv6 multicast forwarding on a non-querier.
Use undo mld proxy forwarding to disable IPv6 multicast forwarding on a non-querier.
Syntax
mld proxy forwarding
undo mld proxy forwarding
Default
IPv6 multicast forwarding is disabled on a non-querier.
Views
Interface view