R0106-HP MSR Router Series IP Multicast Command Reference(V7)

247
Views
Interface view
Predefined user roles
network-admin
Parameters
version-number: Specifies an MLD version, 1 or 2.
Examples
# Specify the MLD version 1 on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mld version 2
proxy multipath (MLD view)
Use proxy multipath to enable load splitting on the MLD proxy.
Use undo proxy multipath to disable load splitting on the MLD proxy.
Syntax
proxy multipath
undo proxy multipath
Default
The load splitting feature is disabled on the MLD proxy.
Views
MLD view
Predefined user roles
network-admin
Usage guidelines
When you enable MLD proxying on multiple interface of an MLD proxy device, one of the following
occurs:
• If the load splitting function is disabled, only the interface with the highest IP address forwards the
IPv6 multicast data.
• If the load splitting function is enabled, the MLD proxying enabled interfaces share the IPv6
multicast traffic delivery on a per-group basis.
Examples
# Enable the load splitting function on the MLD proxy device.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] proxy multipath
reset mld group
Use reset mld group to remove dynamic MLD group entries.