R0106-HP MSR Router Series IP Multicast Command Reference(V7)

251
Syntax
bidir-pim enable
undo bidir-pim enable
Default
IPv6 BIDIR-PIM is disabled.
Views
IPv6 PIM view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only after IPv6 multicast routing is enabled.
Examples
# Enable IPv6 multicast routing on the public network, and enable IPv6 BIDIR-PIM.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] ipv6 pim
[Sysname-pim6] bidir-pim enable
Related commands
ipv6 multicast routing
bidir-rp-limit (IPv6 PIM view)
Use bidir-rp-limit to configure the maximum number of RPs in BIDIR-PIM.
Use undo bidir-rp-limit to restore the default.
Syntax
bidir-rp-limit limit
undo bidir-rp-limit
Default
The maximum number of RPs in Ipv6 BIDIR-PIM is 6.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
limit: Specifies the maximum number of RPs in IPv6 BIDIR-PIM, in the range of 1 to the number allowed
by the system.
The following matrix shows the value ranges for the limit argument: