R0106-HP MSR Router Series IP Multicast Command Reference(V7)

258
Priority: 64
Hash mask length: 126
Scope: 8
State: Pending
Bootstrap timer: 00:00:07
Candidate BSR address: 17:13::1
Priority: 64
Hash mask length: 126
Table 71 Command output
Field Descri
p
tion
Scope-zone expiry timer Scoped zone aging timer.
Elected BSR address Address of the elected BSR.
Candidate BSR address Address of the candidate BSR.
Priority BSR priority.
Uptime Length of time the BSR has been up.
display ipv6 pim claimed-route
Use display ipv6 pim claimed-route to display information about all routes that IPv6 PIM uses.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] claimed-route [ipv6-source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays information about
all routes that IPv6 PIM uses on the public network.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify any IPv6
multicast source, the command displays information about all routes that IPv6 PIM uses.
Examples
# Display information about all routes that IPv6 PIM uses on the public network.
<Sysname> display ipv6 pim claimed-route
RPF-route selecting rule: longest-match
Route/mask: 7:11::/64 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8::2
Total number of (S,G) or (*,G) dependent on this route entry: 4