R0106-HP MSR Router Series IP Multicast Command Reference(V7)

265
Field Descri
p
tion
Expires/Expiry time
Time remaining of the IPv6 PIM neighbor lifetime. If the IPv6 PIM neighbor
is always up and reachable, this field displays never.
DR-Priority/DR Priority Priority of the IPv6 PIM neighbor.
Mode
IPv6 PIM mode. If the IPv6 PIM mode is BIDIR-PIM, this field displays B. If
an IPv6 PIM mode other than IPv6 BIDIR-PIM is used, this field is blank.
Generation ID
Generation ID of the IPv6 PIM neighbor. (A random value represents a
status change of the IPv6 PIM neighbor.)
Holdtime
Lifetime of the IPv6 PIM neighbor. If the IPv6 PIM neighbor is always up
and reachable, this field displays forever.
LAN delay Delay for sending prune messages.
Override interval Interval between two override messages.
State refresh interval
Interval for refreshing state. This field is displayed only when the IPv6 PIM
neighbor is operating in IPv6 PIM-DM mode and the state refresh feature
is enabled.
Neighbor tracking Neighbor tracking status: enabled or disabled.
Bidirectional PIM Whether IPv6 BIDIR-PIM is enabled.
Secondary address(es) Secondary IPv6 address (non-link-local address) of the IPv6 PIM neighbor.
display ipv6 pim routing-table
Use display ipv6 pim routing-table to display information about IPv6 PIM routing entries.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] routing-table [ ipv6-group-address [ prefix-length ]
| ipv6-source-address [ prefix-length ] | flags flag-value | fsm | incoming-interface interface-type
interface-number | mode mode-type | outgoing-interface { exclude | include | match } interface-type
interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays information about
IPv6 PIM routing entries on the public network.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16, where "x" and "y" represent any hexadecimal numbers from 0 to F. If you do not
specify any IPv6 multicast group , the command displays IPv6 PIM routing entries for all IPv6 multicast
groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.