R0106-HP MSR Router Series IP Multicast Command Reference(V7)

266
prefix-length: Specifies a prefix length of the IPv6 multicast group or IPv6 multicast source address. The
default value is 128. For an IPv6 multicast group address, the value for this argument is in the range of
8 to 128. For an IPv6 multicast source address, the value for this argument is in the range of 0 to 128.
flags flag-value: Specifies a flag. If you do not specify any flag, the command displays IPv6 PIM routing
entries that contain all flags.
The following lists the values for the flag-value argument and their meanings:
• act: Specifies IPv6 PIM routing entries that have been used for routing data.
• del: Specifies IPv6 PIM routing entries to be deleted.
• exprune: Specifies IPv6 PIM routing entries that contain outgoing interfaces pruned by other IPv6
multicast routing protocols.
• ext: Specifies IPv6 PIM routing entries that contain outgoing interfaces provided by other multicast
routing protocols.
• loc: Specifies IPv6 PIM routing entries on the devices that reside on the same subnet as the IPv6
multicast source.
• niif: Specifies IPv6 PIM routing entries that contain unknown incoming interfaces.
• nonbr: Specifies IPv6 PIM routing entries with IPv6 PIM neighbor lookup failure.
• rpt: Specifies IPv6 PIM routing entries on the RPT branches where (S, G) prunes have been sent to
the RP.
• spt: Specifies IPv6 PIM routing entries on the SPT.
• swt: Specifies IPv6 PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies IPv6 PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify any incoming interface, the command displays IPv6 PIM routing entries that contain all incoming
interfaces.
interface-type interface-number: Specifies an interface by its type and number.
mode mode-type: Specifies an IPv6 PIM mode. If you do not specify any IPv6 PIM mode, the command
displays IPv6 PIM routing entries in all modes. The available IPv6 PIM modes include:
• bidir: Specifies IPv6 BIDIR-PIM.
• dm: Specifies IPv6 PIM-DM.
• sm: Specifies IPv6 PIM-SM.
• ssm: Specifies IPv6 PIM-SSM.
outgoing-interface { exclude | include
| mat
ch } interface-type interface-number: Specifies an outgoing
interface. If you do not specify any outgoing interface, the command displays IPv6 PIM routing entries
that contain all outgoing interfaces. Whether the specified outgoing interface is contained in the IPv6
PIM routing table depends on the following conditions:
• If you specify an excluded interface, the command displays IPv6 PIM routing entries that do not
contain the specified outgoing interface.
• If you specify an included interface, the command displays IPv6 PIM routing entries that contain the
specified outgoing interface.
• If you specify a matching interface, the command displays IPv6 PIM routing entries that contain only
the specified outgoing interface.