R0106-HP MSR Router Series IP Multicast Command Reference(V7)

270
3:3::3 2002 pim-sm No
3:3::4 pim-sm No
3:3::5 2002 pim-sm Yes
Anycast-RP information:
RP address Member address State
3:3::1 1:1::1 Active
3:3::1 1:1::2 Local
3:3::1 1:2::1 Remote
Table 79 Command output
Field Descri
p
tion
Group/MaskLen IPv6 multicast group to which the RP is designated.
[B]
The RP provides services for IPv6 multicast groups in the BIDIR-PIM domain. This
field is not displayed if the RP provides services for groups in the IPv6 PIM-SM
domain.
(local)
Local address. This field is not displayed if the IPv6 address is not a local
address.
Priority Priority of the RP.
HoldTime RP lifetime.
Uptime Length of time the RP has been up.
Expires Remaining lifetime for the RP.
Preferred Whether the static RP is preferred.
Configured ACL/ACL ACL defining the IPv6 multicast groups to which the static RP is designated.
Mode RP service mode, IPv6 PIM-SM or IPv6 BIDIR-PIM.
RP mapping for this group IPv6 address of the RP that provides services for the IPv6 multicast group.
Anycast-RP 7:12::1
members
Members of Anycast RP 7:12::1.
Member address IPv6 address of the Anycast RP member.
State
State of the interface from which the member address originates:
• Active—Activated local interface.
• Local—Inactivated local interface.
• Remote—Remote interface.
display ipv6 pim statistics
Use display ipv6 pim statistics to display statistics for IPv6 PIM packets.
Syntax
display ipv6 pim statistics
Views
Any view