R0106-HP MSR Router Series IP Multicast Command Reference(V7)

272
hello-option dr-priority (IPv6 PIM view)
Use hello-option dr-priority to set the global DR priority.
Use undo hello-option dr-priority to restore the default.
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
Default
The global DR priority is 1.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
priority: Sets a DR priority, in the range of 0 to 4294967295. A larger value represents a higher priority.
Usage guidelines
You can set the DR priority in IPv6 PIM view or interface view. The configurations made in IPv6 PIM view
are effective on all interfaces. The configurations made in interface view are effective on only the current
interface. If you set the DR priority in both IPv6 PIM view and interface view, the configuration in interface
view always takes precedence.
Examples
# Set the global DR priority to 3 on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option dr-priority 3
Related commands
ipv6 pim hello-option dr-priority
hello-option holdtime (IPv6 PIM view)
Use hello-option holdtime to set the global IPv6 PIM neighbor lifetime.
Use undo hello-option holdtime to restore the default.
Syntax
hello-option holdtime time
undo hello-option holdtime
Default
The global IPv6 PIM neighbor lifetime is 105 seconds.
Views
IPv6 PIM view