R0106-HP MSR Router Series IP Multicast Command Reference(V7)

273
Predefined user roles
network-admin
Parameters
time: Sets the IPv6 PIM neighbor lifetime in the range of 1 to 65535 seconds. If you set the value to
65535, the IPv6 PIM neighbors are always reachable.
Usage guidelines
You can set the IPv6 PIM neighbor lifetime in IPv6 PIM view or interface view. The configurations made
in IPv6 PIM view are effective on all interfaces. The configurations made in interface view are effective on
only the current interface. If you set the IPv6 PIM neighbor lifetime in both IPv6 PIM view and interface
view, the configuration in interface view always takes precedence.
Examples
# Set the global IPv6 PIM neighbor lifetime to 120 seconds on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option holdtime 120
Related commands
ipv6 pim hello-option holdtime
hello-option lan-delay (IPv6 PIM view)
Use hello-option lan-delay to set the global prune delay (the delay for forwarding a received prune
message).
Use undo hello-option lan-delay to restore the default.
Syntax
hello-option lan-delay delay
undo hello-option lan-delay
Default
The global prune delay is 500 milliseconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
delay: Sets the prune delay in the range of 1 to 32767 milliseconds.
Usage guidelines
You can set the prune delay in IPv6 PIM view or interface view. The configurations made in IPv6 PIM view
are effective on all interfaces. The configurations made in interface view are effective on only the current
interface. If you set the prune delay in both IPv6 PIM view and interface view, the configuration in
interface view always takes precedence.
Examples
# Set the global prune delay to 200 milliseconds on the public network.