R0106-HP MSR Router Series IP Multicast Command Reference(V7)

275
undo hello-option override-interval
Default
The global override interval is 2500 milliseconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
interval: Sets the override interval in the range of 1 to 65535 milliseconds.
Usage guidelines
You can set the override interval in IPv6 PIM view or interface view. The configurations made in IPv6 PIM
view are effective on all interfaces. The configurations made in interface view are effective on only the
current interface. If you set the override interval in both IPv6 PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the global override interval to 2000 milliseconds on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option override-interval 2000
Related commands
• hello-option lan-delay (IPv6 PIM view)
• ipv6 pim hello-option lan-delay
• ipv6 pim hello-option override-interval
holdtime join-prune (IPv6 PIM view)
Use holdtime join-prune to set the global joined/pruned state holdtime timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune time
undo holdtime join-prune
Default
The global joined/pruned state holdtime timer is 210 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer in the range of 1 to 65535 seconds.