R0106-HP MSR Router Series IP Multicast Command Reference(V7)

280
Predefined user roles
network-admin
Parameters
time: Sets the IPv6 PIM neighbor lifetime in the range of 1 to 65535 seconds. If you set the value to
65535, the IPv6 PIM neighbor is always reachable.
Usage guidelines
You can set the IPv6 PIM neighbor lifetime in IPv6 PIM view or interface view. The configurations made
in IPv6 PIM view are effective on all interfaces. The configurations made in interface view are effective on
only the current interface. If you set the IPv6 PIM neighbor lifetime in both IPv6 PIM view and interface
view, the configuration in interface view always takes precedence.
Examples
# Sets the IPv6 PIM neighbor lifetime to 120 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 pim hello-option holdtime 120
Related commands
hello-option holdtime (IPv6 PIM view)
ipv6 pim hello-option lan-delay
Use ipv6 pim hello-option lan-delay to set the prune delay on an interface.
Use undo ipv6 pim hello-option lan-delay to restore the default.
Syntax
ipv6 pim hello-option lan-delay delay
undo ipv6 pim hello-option lan-delay
Default
The prune delay is 500 milliseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
delay: Sets the prune delay in the range of 1 to 32767 milliseconds.
Usage guidelines
You can set the prune delay in IPv6 PIM view or interface view. The configurations made in IPv6 PIM view
are effective on all interfaces. The configurations made in interface view are effective on only the current
interface. If you set the prune delay in both IPv6 PIM view and interface view, the configuration in
interface view always takes precedence.
Examples
# Set the prune delay to 200 milliseconds on GigabitEthernet 2/1/1.
<Sysname> system-view