R0106-HP MSR Router Series IP Multicast Command Reference(V7)

282
[Sysname-GigabitEthernet2/1/1] ipv6 pim hello-option neighbor-tracking disable
Related commands
hello-option neighbor-tracking (IPv6 PIM view)
ipv6 pim hello-option override-interval
Use ipv6 pim hello-option override-interval to set the override interval on an interface.
Use undo ipv6 pim hello-option override-interval to restore the default.
Syntax
ipv6 pim hello-option override-interval interval
undo ipv6 pim hello-option override-interval
Default
The override interval is 2500 milliseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets the override interval in the range of 1 to 65535 milliseconds.
Usage guidelines
You can set the override interval in IPv6 PIM view or interface view. The configurations made in IPv6 PIM
view are effective on all interfaces. The configurations made in interface view are effective on only the
current interface. If you set the override interval in both IPv6 PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the override interval to 2000 milliseconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 pim hello-option override-interval 2000
Related commands
• hello-option lan-delay (IPv6 PIM view)
• hello-option override-interval (IPv6 PIM view)
• ipv6 pim hello-option lan-delay
ipv6 pim holdtime join-prune
Use ipv6 pim holdtime join-prune to set the joined/pruned state holdtime timer on an interface.
Use undo ipv6 pim holdtime join-prune to restore the default.
Syntax
ipv6 pim holdtime join-prune time