R0106-HP MSR Router Series IP Multicast Command Reference(V7)

288
[Sysname-GigabitEthernet2/1/1] ipv6 pim timer join-prune 80
Related commands
• ipv6 pim holdtime join-prune
• timer join-prune (IPv6 PIM view)
ipv6 pim triggered-hello-delay
Use ipv6 pim triggered-hello-delay to set the maximum delay between two hello messages.
Use undo ipv6 pim triggered-hello-delay to restore the default.
Syntax
ipv6 pim triggered-hello-delay delay
undo ipv6 pim triggered-hello-delay
Default
The maximum delay between two hello messages is 5 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
delay: Sets the maximum delay between two hello messages, in the range of 1 to 60 seconds.
Examples
# Set the maximum delay between two hello messages to 3 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 pim triggered-hello-delay 3
jp-pkt-size (IPv6 PIM view)
Use jp-pkt-size to set the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size size
undo jp-pkt-size
Default
The maximum size of a join/prune message is 8100 bytes.
Views
IPv6 PIM view
Predefined user roles
network-admin